+86 138 8989 6699
sales@rksfluid.com
ATHENA Series Double Eccentric Butterfly Valve DN150–DN1800 | RKSfluid
Type:Cartridge filter Material:SS304, SS316L Filtration Precision:0.1-20um Pressure:0.6Mpa, 1.0Mpa Filter core number:1~12 PC Filter element length: 2~40 inch Temperature:≦130℃ Application: Chemical industry. Water treatment, Papermaking, Automobile industry, petroleum, Machining, Coating, electronic etc.
Series: Candle Filter Filter core length: 800~2500 Filter cylinder dimensions: 550~2200 Filter cake specification:15~60mm Filter core number: 7~205 Filter area: 0.9~144.8㎡ Application: Biopharmaceutical, Chemical Industry, Food and beverages, Metal processing
Pig Receiver Manufacturer for Oil & Gas Pipeline Systems
RKSfluid manufactures Pig Receivers for pipeline pigging operations in oil and gas transmission, gathering and processing systems. A Pig Receiver is installed at the receiving end of a pigging pipeline to collect pigs after they travel through the pipeline for cleaning, inspection, separation or maintenance operations.
Designed according to pipeline operating conditions, pig dimensions and project requirements, RKSfluid Pig Receivers provide the required receiving space, internal guidance and access configuration for pig retrieval. The equipment can be supplied as an individual pressure vessel or integrated into a complete pigging system with associated valves, quick opening closures, instrumentation and handling equipment.
1. Engineering Design and Manufacturing Range
RKSfluid Pig Receivers are configured according to the technical requirements of each pipeline project.
| Nominal Diameter | DN150–DN2000 |
| Design Pressure | 1.6–16 MPa |
| Applicable Medium | Crude oil, refined petroleum products, natural gas and water |
| Pig Types | Foam pigs,cup pigs,brush pigs and intelligent pigs,subject to dimensional compatibility |
| Design Codes | ASME BPVC Section VIII Division 1, ASME B31.3, B31.4 and B31.8, as applicable |
The specifications above represent the reference manufacturing range. Final dimensions, pressure ratings, materials, testing requirements and design details are subject to approved project specifications and engineering review.
2. Structure and Main Components
A Pig Receiver consists of a pressure-bearing barrel and associated connections designed to receive and retrieve pipeline pigs. Its configuration is determined by pipeline diameter, pig dimensions, operating conditions and site layout.
Typical components include:
The final component arrangement is determined by the approved general arrangement drawing and project requirements.

3. Receiving Barrel Design and Pig Handling
The receiving barrel is a key design consideration for a Pig Receiver. It must provide sufficient internal space for the incoming pig and allow safe retrieval after the pigging operation.
The barrel length and internal configuration are determined by:
Depending on the application, the Pig Receiver can be equipped with internal guide rails, pig trays, receiving baskets or other support arrangements. Pig handling equipment, such as receiving trolleys, lifting devices and guide structures, can also be considered according to pig weight, dimensions and site conditions.
4. Quick Opening Closure and Safety Configuration
The quick opening closure is an important component of a Pig Receiver, allowing access to the receiving barrel for pig removal and equipment maintenance.
RKSfluid Pig Receivers can be configured with suitable quick opening closures according to nominal diameter, design pressure, operating conditions and project specifications.
The closure arrangement may include: mechanical locking structure, pressure warning device, safety interlock mechanism, sealing components, venting and pressure-release connections
The closure configuration and safety provisions are determined by the selected closure design and project requirements. Before opening the closure, the equipment must be isolated, depressurized and drained in accordance with the approved operating procedure. The pressure warning device is not a substitute for the required isolation and pressure-release procedure.
5. Design Standards and ASME U Stamp
RKSfluid Pig Receivers can be designed and manufactured according to applicable pressure vessel and pipeline requirements.
ASME BPVC Section VIII Division 1
Applicable for pressure vessel design and construction. RKSfluid can supply Pig Receivers with ASME U Stamp certification for projects requiring compliance with ASME BPVC Section VIII Division 1, subject to the applicable manufacturing and certification scope.
ASME B31 Pipeline Codes
The applicable pipeline code is selected according to the pipeline service and project scope:
Other applicable standards and project specifications can be reviewed during engineering evaluation.
6. Manufacturing, Inspection and Quality Control
RKSfluid applies project-based quality control throughout Pig Receiver manufacturing, covering material verification, fabrication, welding, inspection and final testing.
Depending on the applicable design code and approved Inspection and Test Plan (ITP), the quality control scope may include:
7. Customized Pig Receiver Solutions
RKSfluid provides customized Pig Receiver manufacturing for different pipeline sizes, pressure ratings and project configurations.
Available engineering considerations include:
Pig Receivers can be supplied independently or coordinated with Pig Launchers, quick opening closures, pipeline valves and related pigging equipment for complete system requirements.

Contact RKSfluid
Send your Pig Receiver datasheet or project specifications to RKSfluid for technical evaluation and a customized quotation. Our team can review the required pressure rating, receiving barrel dimensions, closure configuration, ASME requirements and inspection scope for your project.
High-quality valves and filtration products with strict quality control is our commitment.