Quick Opening Closure Manufacturer

Home > Category > Pig Launcher and Receiver  > Quick Opening Closure Manufacturer

Main Product

News

The Difference Between A Lug and Wafer Butterfly Valve

The Difference Between A Lug and Wafer Butterfly Valve

2019-02-12 16:59:28

Butterfly valves have been around for a long time, and are used for a variety of applications. They made their first appearance during the 1930s, and have been utilized by several industries ever since. Often made out of cast iron, butterfly valve's name is based from the functionality of its disc.

Wafer type butterfly valve installation instructions and steps

Wafer type butterfly valve installation instructions and steps

2019-01-03 16:27:13

The wafer butterfly valve is one of the most common types of valves in industrial pipelines. The structure of wafer butterfly valve itself is relatively small. It is only necessary to put the butterfly valve in the middle of the flange at both ends of the pipe, and use the stud bolt to pass through the pipe flange and the pair.

Twenty-five Taboos for Valve Installation

Twenty-five Taboos for Valve Installation

2019-09-06 10:23:57

Valves are the most common equipment in chemical companies. It seems easy to install valves, but if they are not implemented in accordance with the re...

Manual valve operation method

Manual valve operation method

2019-04-01 11:50:16

The manual valve is a valve operated by the handle and the hand wheel, and is a commonly used valve on the equipment pipeline.

Valve common standards and differences

Valve common standards and differences

2019-05-07 17:37:21

DIN standard now uses EN standard structure length
EN 558-1 PN flange connection valve construction length (instead of DIN 3202), EN 558-2 CLASS flange connection valve construction length (instead of BS2080), EN 12982 butt weld end valve construction length (instead of DIN 3202), DIN standard The length of the structure including the length of the API valve is basically the same as the length of the GB...

Butterfly Valve Seat & Seal Ring Replacement Method

Butterfly Valve Seat & Seal Ring Replacement Method

2021-02-01 18:14:53

The butterfly valve disc is a key component of the butterfly valve, which acts on closing and opening and closing. Butterfly valve seat and butterfly ...

What's the working principle of Kieselguhr Filter?

What's the working principle of Kieselguhr Filter?

2019-07-01 13:05:32

What is Kieselguhr Filter? What's the working principle of Kieselguhr Filter? The kieselguhr filter (Candle filter /  Cake Filter) which we for customized for fluorine chemical plant six more lithium fluoride phosphate phosphorus process have been installed and working for two years

Resilient Seated Gate Valve

Resilient Seated Gate Valve

2022-10-17 16:09:38

Resilient-seated gate valve with bolted cover connection; made of ductile iron materials and with epoxy coating, designed as both clockwise and anti-c...

New designed PTFE  RPTFE sealing replaceable seat high performance butterfly valve

New designed PTFE RPTFE sealing replaceable seat high performance butterfly valve

2022-04-24 10:39:22

MINOTAUR series replaceable seat high performance butterfly valve

Contact us

RKSfluid Flow Control Company

Web: www.rksfluid.com
Tel:  +86 24 2318 0188
Fax: +86 24 2318 0788
Mail: info@rksfluid.com

Quick Opening Closure Manufacturer

  • Equipment Type: Quick Opening Closure
  • Structural Types: Bandlock Type, Clamped Type, Inserted Type
  • Nominal Diameter:
  • - Bandlock Type: DN300–DN2000
  • - Clamped Type: DN150–DN1500
  • - Inserted Type: DN80–DN300
  • Applicable Media: Oil, natural gas, water, ore pulp and chemical media, subject to the selected type and material compatibility
  • Typical Applications: Pig Launchers, Pig Receivers, Basket Filters, Separator Vessels and Industrial Pipeline Equipment
  • Product Details

RKSfluid Quick Opening Closures are pressure-retaining devices designed to provide access to pipeline equipment and pressure vessels for inspection, cleaning, maintenance and pig handling. Compared with conventional bolted blind flanges, a Quick Opening Closure reduces opening and closing time while providing a secure mechanical locking arrangement and safety interlock.

RKSfluid offers three structural types: Bandlock Type, Clamped Type and Inserted Type. Each type is designed for different operating conditions, opening frequencies and pressure requirements.


1. Types of Quick Opening Closures

1.1 Bandlock Type

The Bandlock Type Quick Opening Closure uses a circumferential locking band to secure the closure door. Its locking structure distributes loads around the circumference and allows convenient opening and closing.

It is designed for applications requiring frequent access, particularly pipeline pig launcher and receiver systems.

Design Configurations: Inner Bandlock Type, Outer Bandlock Type, Horizontal Installation, Vertical Installation

Typical Applications:

  • Pig Launchers and Pig Receivers
  • Natural Gas Transmission Pipelines
  • Compressor Stations
  • Oil and Gas Station Facilities

Technical Characteristics

Nominal Diameter DN300–DN2000
Design Pressure 1.6–30 MPa
Applicable Media Oil, natural gas, water, ore pulp and other compatible media
Opening Performance Opened less than 200N within 60s
Sealing Ring Service Life ≥2 years

1.2 Clamped Type

The Clamped Type Quick Opening Closure uses a clamp assembly to secure the closure cap to the cylinder flange. It provides reliable sealing and convenient access for equipment requiring periodic maintenance.

This type is used in pig launcher and receiver systems, filter equipment and other industrial pipeline applications where moderate opening frequency is required.

Main Components: Closure Cap, Clamp Assembly, Pup Joint, Safety Interlock Mechanism, Opening and Closing Mechanism

Typical Applications:

  • Pig Launchers and Pig Receivers
  • Basket Filters and Separator Vessels
  • Oil and Gas Station Equipment
  • Industrial Pipeline Systems

Technical Characteristics

Nominal Diameter DN150–DN1500
Design Pressure Up to 35 MPa
Design Temperature -30°C to +100°C
Applicable Media Oil, gas, water and chemical media


1.3 Inserted Type

The Inserted Type Quick Opening Closure is designed for high-pressure applications where opening frequency is relatively low and operational safety is a key requirement.

Its internal inserted structure allows internal pressure to enhance the sealing effect. The compact construction is suitable for demanding operating conditions.


Main Components: Closure Cap, Cylinder Flange, Safety Interlock Mechanism

Typical Applications:

  • High-Pressure Gas Pipelines
  • Hazardous or Critical Service Systems
  • Long-Term Continuous Operation Facilities
  • Oil and Gas Transmission and Processing Units

Technical Characteristics

Nominal Diameter DN80–DN300
Design Pressure Up to 35 MPa
Design Temperature -30°C to +100°C
Applicable Media Oil, gas, water and chemical media

2. Locking, Sealing and Safety Interlock

The locking structure and sealing arrangement are selected according to the closure type, design pressure, operating temperature and process medium.

A safety interlock mechanism is incorporated to help prevent the closure from being opened while internal pressure remains. Depending on the design, pressure-release and pressure-warning arrangements are provided as part of the operating safety system.

Before opening, the equipment must be isolated, depressurized and verified to be at zero pressure in accordance with the approved operating procedure. The interlock is a safety provision and does not replace proper isolation and pressure release.


3. Customized Quick Opening Closure Supply

RKSfluid can evaluate project requirements for different closure types, dimensions and operating conditions.

For technical evaluation and quotation, please provide:

  • Required Nominal Diameter or Opening Size
  • Design Pressure and Operating Pressure
  • Design and Operating Temperature
  • Process Medium
  • Preferred Closure Type, if specified
  • Applicable Design Code
  • Material and Corrosion Requirements
  • Installation Orientation
  • Inspection, Testing and Documentation Requirements

Existing equipment drawings, datasheets or photographs are helpful for replacement and retrofit projects.

Contact RKSfluid for technical evaluation and quotation of Quick Opening Closures.

FAQs

A Quick Opening Closure provides access to the interior of pipeline equipment and pressure vessels for inspection, cleaning, maintenance and pig handling. It is commonly installed on pig launchers, pig receivers and filter vessels.
RKSfluid offers three structural types: Bandlock Type, Clamped Type and Inserted Type. Each type has different structural features, size ranges and pressure capabilities to suit specific operating requirements.
The Bandlock Type uses a circumferential locking band and is designed for frequent opening operations. The Clamped Type uses a clamp assembly and is suitable for applications requiring periodic maintenance access. The Inserted Type uses an internal inserted structure in which internal pressure enhances the sealing effect, making it suitable for high-pressure applications with relatively low opening frequency.
DN300–DN2000 and 1.6–30 MPa for Bandlock Type, DN150–DN1500 and up to 35 MPa for Clamped Type, and DN80–DN300 and up to 35 MPa for Inserted Type. Final specifications are subject to the selected design and project requirements.
Yes. Quick Opening Closures are commonly installed on both pig launchers and pig receivers to provide access for loading and retrieving pipeline pigs. The closure configuration is selected according to the equipment dimensions and operating conditions.
A safety interlock mechanism is included in the product design. Depending on the configuration, pressure-release and pressure-warning arrangements can also be incorporated. The equipment must be isolated and fully depressurized before opening, in accordance with the approved operating procedure.
Inspection may include material verification, dimensional checks, welding examination, non-destructive testing, pressure testing, opening and closing operation checks, sealing inspection and safety interlock testing. The actual scope follows the applicable design requirements and project ITP.
Please provide the opening diameter, design pressure, operating temperature, process medium, preferred closure type, applicable design code, material requirements and inspection scope. Existing equipment drawings or datasheets are recommended for technical evaluation.
RKSfluid Flow Control Co., Ltd.

Tel:+86 151 4027 2439

Contact Person:Damon

Damon
Send Us An Inquiry
We will contact you as soon as possible!
Phone
Phone
WeChat
Teams
Whatsapp
captcha
If you have questions or suggestions,please leave us a message,we will reply you as soon as we can!