News
Silent check valves
- Author:RKSfluid
- Release on:2022-11-23
Silent check valves, also known as non-slam check valves and spring-assisted check valves reduce or eliminate water hammer and its effects.
· High strength ductile iron body used for durability and less weight. · Advanced dynamic design of single body with diffuser provides streamline flow and assures lower head loss.
· One of the lowest head loss check valve, big save in pumping power cost, valve disc with shorter stroker and spring reverse faster than most of check valve.
· Coated with powder epoxy both inside & outside for corrosion resistance.
· Bronze bushing reduce wearing problem during operation.
· Hydrodynamic design with spring ensures non slamming and water hammerless.
· Stainless steel spring hidden in the diffuser under protection while valve in operation.
· Disc will positively close before reverse flow, and maximize the closing speed up to 0.2 Sec.
· Installation can be vertical/horizontal/ inclined.
· Comply with EN 558-1, ISO 5752 and EN 1092-2, ISO 7005-2 flange dimension.

Size | DN50-DN600 |
Pressure Ratings | PN10/PN16/PN25 |
Temperature Range | 0℃~+80℃ |
Body | ductile iron,stainless steel |
Medium | water,gas |
Design Standard | GB/T 12235-2007 |
Face to Face | EN 558-1 |
Flange | EN 1092-2 |